Overview/Description
Communication adopts set of a channel, which are divided into upper orifice and lower orifice; the lower orifice is the input signal of the previous station; the upper orifice is the output signal output to the next station
Specification
1. Connection settings
Select the network mode from the five network path models, and make the corresponding network path settings.
For the import detailed , please refer to the manual of the control used.
2. Electrical specifications
Five-network 16P reed LED mixed I/O board
3. Principles of LED lights
1. Input (X0~XF): The LED light signal is the green light terminal block COM (common negative voltage for external contacts)
2. Output (Y0~YF): The LED light signal is the red light terminal block COM+ (common positive voltage for external power connection)
4.Seven segment displays
There are three seven-segment displays on each ODEAR five-network module to display information on the terminal block
5. Knob function
The red knob is to select the network mode, and the selection number (0~4) of the channel is switched to a different network
0: CC-LINK IE Field Basic
1: PROFINET
2: EtherCAT
3: EtherNET/IP
4: MODBUS-TCP/IP
The yellow knob is for displaying IP information and channel IO status
6.the magic design of Duzitai
Red: Positive 24V
Black: Negative 0V
Green: ground
Light gray: signal points
Dark gray: COM point
Application/ Target Market
1.AI
2.IoT
3.Edgecross
4.IPC+WMX3(PC BASE MOTION)
5.ETHERCAT Servo Motor
6.ETHERCAT I/O, A/D D/A
7.CCD
8.ROBOT
9.STAGE, XY TABLE
10.SENSOR
11.AGV
