Overview/Description
Select the network mode from the five network modes, and then make the corresponding network settings.
Specification
1. Rules of LED light
MAX: red light
MIN: green light
Power: red light
N0: Green light (in operation)
light off (stop)
ERR: red light (abnormal)
light off (normal)
2. Knob function
The red knob is for network mode selection and channel selection
The yellow knob is for displaying information, and it can also be used with the channel of the red knob to select the analog setting
3. seven segment display
There are three seven-segment displays on each ODEAR five-network model to display information on the terminal block
Can be serially connected to any network-enabled device
Applicable network:
CC-Link IE Field Basic
Profinet
EtherCAT
EtherNet/IP
MODBUS-TCP/IP
4. Magic design terminal block
Red: positive 24V AD: analog input
Black: Negative 0V DA: Analog output
Green: ground
Light gray: signal points
Dark gray: COM point
Application/ Target Market
1.AI
2.IoT
3.Edgecross
4.IPC+WMX3(PC BASE MOTION)
5.ETHERCAT Servo Motor
6.ETHERCAT I/O, A/D D/A
7.CCD
8.ROBOT
9.STAGE, XY TABLE
10.SENSOR
11.AGV
